Jurgen Engelfried December 27, 1994 How to install an NCD XTerminal for E781 ======================================== 1) Switch on the Terminal to find out the Ethernet Hardware Address or look at the bottom of the stand. 2) Send mail to netmanager@fnnet to apply for an IP Address. We have several sub-nets. Specify if the XTerm will be on the DAQ subnet (E781/DAQ) or on the Appeltalk subnet (E781/APP). You can find forms from previous request in /home/jurgen/letter/*.from It takes usally about 1 day to receive the address. 3) login as root on fn781a. cd to /tftpboot. Make a symbolic link with the ip-address to the proper file. 4) cd to /usr/lib/X11/ncd/configs/. touch .std and create (copy another one and edit it). 5) Got to the xterminal and type the following line (one! line): ??? /tftpboot/Xncd19r 131.225.204.??? 131.225.204.66 131.225.204.(64/126) 255.255.255.192 replace ??? with the assigned number, 64/126 is the gateway for the DAQ and the APP net resp. Xncd19r is to replaced by Xncd17c when needed. 6) After the XTerm is up, open the console and save the config in nvram. 7) Reboot the XTerm. It should come up itself.